MAX4038ETA+

Basic information about MAX4038ETA+ amplifier:

MAX4038ETA+ is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are HVSON, SOLCC8,.11,20

MAX4038ETA+ amplifier core information:

The MAX4038ETA+ has a minimum operating temperature of -40 °C and a maximum operating temperature of 85 °C. Its peak reflow temperature is 2600°C. Its maximum bias current at 25°C is: 0.00001 µA. Its maximum average bias current is 0.0001 µA.

How to simply check the efficiency of an amplifier? Looking at its slew rate, the MAX4038ETA+ has a nominal slew rate of 4000 V/us. The maximum slew rate of the MAX4038ETA+ given by the manufacturer is 0.0064 mA. Its minimum voltage gain is 4470. When the op amp is used in a closed loop, at a specified closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the MAX4038ETA+ gain becomes 0.707 times the low-frequency gain is 4 kHz. The power of the MAX4038ETA+ is NO. Its programmable power is NO.

The nominal supply voltage of the MAX4038ETA+ is 3 V. The range of its power supply is: 3 V. The input offset voltage of the MAX4038ETA+ is 8000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the op amp output terminal 0V (or close to 0V).)

Related dimensions of MAX4038ETA+:

The width of MAX4038ETA+ is: 3 mm, and the length is 3 mm. MAX4038ETA+ has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.65 mm. Total pins: 8

MAX4038ETA+ amplifier additional information:

MAX4038ETA+ adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low-bias class of amplifiers. It does not belong to the low offset class of amplifiers. The frequency compensation status of MAX4038ETA+ is: YES. Its temperature grade is: INDUSTRIAL.

And its humidity sensitivity level is: 1. It is a micropower amplifier. The MAX4038ETA+ is not Rohs certified. It does not contain lead. The corresponding JESD-30 code is: S-PDSO-N8.

The corresponding JESD-609 code is: e3. The packaging code of MAX4038ETA+ is: HVSON. The materials used in the MAX4038ETA+ package are mostly PLASTIC/EPOXY. The package shape is SQUARE. The MAX4038ETA+ package pin forms are: SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE.

Its terminal forms are: NO LEAD. The maximum seat height is 0.8 mm.