Add an anti-interference capacitor to the output of the amplifier
Source: InternetPublisher:清宁时光 Keywords: Amplifier BSP frequency converter Updated: 2020/10/11
(2) Frequency converter anti-interference wiring 2
The wiring is as shown in the figure. The photoelectric relay and the frequency converter are in the same system and share the power supply. When the frequency converter is running
, the high-order harmonics generated by the frequency converter will cause the relay to malfunction. To do this,
install a 0. OltLF capacitor C between the COM terminal of the amplifier output and the chassis . to eliminate malfunctions.
- Driving circuit of switching power supply field effect tube
- Basic connection circuit of signal and power supply composed of ISOll3
- Op amp power supply decoupling bypass measures
- Isolated two-wire current loop circuit (XTR101, ISO100)
- Driving circuit that controls LED brightness using PWM signal
- Charging control circuit made by solar energy
- An ultra-low output voltage regulator
- LM317 regulated power supply
- Adjustable voltage power socket
- Switching regulator circuit diagram based on uA78S40
- Motor forward and reverse control wiring diagram (2)
- Ultrasonic blind pathfinder circuit
- Homemade disinfectant circuit
- Physiotherapy ventilator circuit
- Egg warming circuit
- Fish farming thermostatic control circuit
- Farmland irrigation automatic control circuit a
- AC voltmeter
- Capacitive feedback oscillator circuit
- Power phase sequence display circuit