One of the no-load automatic stop circuits of DC arc welding machines
Source: InternetPublisher:toothache Keywords: Arc welding machine BSP Updated: 2021/10/14
The no-load loss of a DC arc welding machine is much greater than that of an AC arc welding machine, so it is more necessary to consider installing a no-load automatic stop device.
(1) The circuit of one of the no-load self-stop circuits of the DC arc welding machine
is as shown in the figure. The contactor KMi chooses CJ20-100A, 380V, the KMz chooses CJ20-40A,
380V, and the time relay KT chooses JS7-1A, 380V, 0.4- 60s.
One of the no-load automatic stop circuits of DC arc welding machines
- CD4011 application circuit - inductive wireless headphone circuit
- Zhongyi brand BCD-215 refrigerator circuit
- Tube amplifier CS8412+PCM63 classic design (power supply part) circuit diagram
- Transformer AC contactor DC operation circuit c
- Triangle CRJ120-A multifunctional non-stick electric hot pot circuit diagram
- Minsk brand MNHCK-22 refrigerator circuit
- Universal inverter deceleration braking circuit
- Chennuxi brand BCD-180 refrigerator circuit
- HA1167 is used as the third image intermediate amplifier circuit for black and white TV sets
- Use LB1405 LB1415 as volume meter application circuit
- Voice controlled flash LED light circuit diagram
- Rural vegetable greenhouse lighting circuit
- Biogas concentration detection line
- Proportional frequency discriminator circuit
- Diode balanced amplitude modulation circuit
- Inductive feedback oscillator circuit
- superheterodyne radio circuit
- Three primary color display circuit
- Sawtooth wave generator circuit (2)
- Sawtooth wave generator circuit (1)