Home >
Control Circuits >PLC Circuits > A soft starter drives the control circuit c of two electric motors
A soft starter drives the control circuit c of two electric motors
Source: InternetPublisher:sigma Keywords: Control circuit motor soft starter BSP Updated: 2021/08/24
The control circuit of JJR1000X soft starter dragging two motors is shown in Figure 17F32. Each motor can be operated independently
, in no particular order. The time interval between two operations is greater than 300s. Soft starter function code 9 (control mode) must be set
to external control. In this way, the soft starter cannot soft-stop and needs to be protected by a thermal relay.
Latest Control Circuits Circuits
- Design and selection of electric control valve system drive
- Design of an autonomous plant watering system using ATtiny85
- How to remotely control devices using ESP8266 and LPC2148
- Introduction to the internal structure of the Delta winding motor
- A small improvement to the temperature and water level indicator alarm
- Design and analysis of a four-bit remote control component capable of remote reset
- Simple three-phase motor phase loss protection circuit
- Amplitude and phase detection leakage protection device designed and manufactured using PIC16C711A
- Bicycle anti-theft alarm
- "Watchdog" anti-theft alarm circuit
Popular Circuits
- strain sensor
- Excellent performance household inverter power supply circuit
- Electronic thermometer circuit
- Rice mill circuit
- Fish farming thermostatic control circuit
- Diode Balanced Mixer Circuit
- Proportional frequency discriminator circuit
- Double gate field effect transistor high frequency amplifier circuit
- common emitter amplifier circuit
- Small current generator circuit
京公网安备 11010802033920号