Light control switch circuit
Source: InternetPublisher:兰博 Keywords: Switch circuit light control switch relay Updated: 2020/04/15
Shown is a light-controlled switch circuit with a simple structure . It works stably and reliably, and is suitable for automatic power supply
control systems for electrical appliances that work at night. IC 1 in the circuit is an operational amplifier UC741C, which is used as a voltage comparator. Its non-inverting input terminal @ pin is adjusted
to obtain a suitable reference voltage by adjusting Rl, and is compared with the voltage on the inverting input terminal ② pin to determine the voltage of its output terminal. level. The voltage on IC 1② pin
is obtained by the series and parallel voltage division of RL, Ri and R2. When there is light, the relay does not work, and when there is no light, the relay operates.
- Controlling stepper motors with wireless remote control transceiver and PE-51 board
- Methods for Eliminating Noise of Brushed DC Motors
- Design and analysis of the principle of automatic power-off switch during power outage
- Amplitude and phase detection leakage protection device designed and manufactured using PIC16C711A
- An experimental model of an infrared radio alarm
- Home thermostat
- Preheating bath water tank water level controller
- Delayed electronic fuse
- Analysis of the working principle of a sequential control circuit
- Add a breeze block to your remote control wall fan
- two-tone generator
- FM modulator strong-weak signal switching circuit a
- Touch bistable switch circuit
- FGDF-3 type three-phase low-temperature iron-plated power supply commutation control and electronic transfer switch circuit
- One of the non-contact proximity switch circuits
- Two-phase three-phase zero-voltage switching circuit using KC08 integrated circuit
- Thyristor AC switch circuit 4
- Light controlled switch circuit diagram of bidirectional thyristor
- Light control switch circuit
- Infrared light control switch circuit diagram 2
京公网安备 11010802033920号