AC and DC inflow automatic switching circuit diagram
Source: InternetPublisher:通通 Keywords: Battery power automatic switching AC and DC Updated: 2021/05/01
The figure below shows the AC/DC inflow automatic switching circuit. After the mains voltage is stepped down by transformer T1, it is then rectified, filtered, and stabilized before being output for load operation. At the same time, another DC voltage generated through rectification and filtering is divided by RP and added to the base of VT2. VT2 is turned on and VT1 is turned off. When the mains power is interrupted, VT2 changes from on to off. At this time, the power field effect transistor VT1 is on, and the battery is added to the voltage stabilizing circuit through VT1 to output a stable DC voltage for negative interception. Due to the use of MOSFET for fast electronic switching, this circuit achieves the purpose of uninterrupted power supply.
- ISO113 circuit that can reduce power consumption
- Single-power supply circuit for ISO122P/ISO124
- Use pulse width modulation to get a precise output voltage
- Simple and practical LED lamp driving circuit
- Constant current LED lamp driver circuit with soft start and anti-shock
- Dynamic power supply for power amplifier controlled by thyristor
- The production of adjustable voltage-stabilized power supply composed of LM317
- A low-cost, high-reliability battery charger for electric vehicles
- LM317T voltage regulation adjustable circuit diagram explanation
- Battery powered switching circuit diagram
- ht4901 reference circuit diagram
- Self-switching power supply
- Power circuit b composed of intelligent thyristor modules
- Solar power circuit
- 3v to 5v circuit diagram
- 4-phase CPU power circuit using HIP6301 and HIP6602 chips
- 300A-18V three-phase thyristor voltage regulating electrolytic power supply circuit
- One of the transistor stabilized current power supply circuits
- Super Class A power amplifier power circuit
- AC and DC dual-purpose flash light