Multifunctional conductivity tester circuit
Source: InternetPublisher:司马缸砸光 Keywords: Power supply protection Updated: 2021/07/03
The circuit of the multifunctional conductivity tester is composed of a detection electrode, a resistor divider, a buffer circuit and a two-color diode, as shown in the figure. The detection electrode can sense the resistance of the object being measured, and control the two-color light-emitting diode to emit light according to the resistance of the object being measured. When the detection electrode senses that the resistance of the object being measured is greater than 300kΩ and less than 1000kΩ, the green indicator light turns on; when it senses that the resistance of the object being measured is less than 300kΩ, the red indicator light turns on, making the two colors synthesize into an orange-red light; when it senses that the resistance of the object being measured is greater than 1000kΩ , the two-color indicator lights VL3 and V⒕ do not light up. Adjusting the potentiometer RP can change the sensing range of the detection electrode.
- Driving circuit of switching power supply field effect tube
- Introduction and principle analysis of switching regulated power supply
- Basic connection circuit of signal and power supply composed of ISOll3
- INA155/INA156 is used to form a single-supply high-side current monitor for detecting load current
- Use pulse width modulation to get a precise output voltage
- Parallel DC regulated power supply circuit diagram
- Principles and precautions of active discharge circuit
- LM317 regulated power supply
- Multi-purpose battery constant current charger
- Lithium Battery Charging Integrated Circuit Diagram
- Delta connection motor phase failure protection circuit
- Power failure protection circuit
- Laser power circuit
- Portable device charging power circuit design
- 2-phase CPU power circuit using HIP6301 and HIP6601 chips
- Timing switch AC power circuit
- Super Class A power amplifier power circuit
- Head amplifier dedicated power supply circuit
- Common power circuits and applications 05
- 5V, 7.5V, 48V power circuit