CB signal transmitter-oscilloscope coupler
Source: InternetPublisher:aerobotics Keywords: Power communication power Updated: 2020/10/19
To display an RF signal, connect L1 to the transmitter and click A and B to the vertical plates of the oscilloscope. Adjust L1 to the minimum SWR and adjust C3 to the desired tracking height on the CRT. L2=4, open 3/4 plug tuning RF coil form, L1=3, adjacent to L1, ground terminal of C1, C2= 5pF, C3=75pF trimmer.
Latest Power Circuits Circuits
- 5 Converter Topologies for Integrated Solar and Storage Systems
- How to use a simple circuit to achieve a smooth soft-start for an isolated converter
- Lithium battery overcharge, over discharge, short circuit protection circuit design
- Op amp power supply decoupling bypass measures
- Using CW34603 to form a circuit to change the polarity of the output power supply
- Dual forward converter schematic diagram
- Charging control circuit made by solar energy
- A novel and practical DC low voltage stabilized power supply
- How to Select Modular EMI Filters for AC-DC Converters
- Solar Lead Acid Battery Charger
Popular Circuits
- Typical Reference Voltage and Power Supply Circuits
- Power circuit with smoothing filter capacitor
- 2-phase CPU power circuit using HIP6301 and HIP6601 chips
- Diamond differential input power amplifier power circuit
- Household emergency power circuit
- Antenna amplifier synchronous power supply circuit
- Common power circuits and applications 08
- AC-DC conversion power supply-inverter power supply circuit
- CTX-C2 dual-band high-resolution color display power circuit
- COMPAQ 420G type SVGA color display power supply circuit
京公网安备 11010802033920号