Home >
Optoelectronic Circuits >Optoelectronic Display Circuits > 3×8 LED driver circuit with overvoltage protection function
3×8 LED driver circuit with overvoltage protection function
Source: InternetPublisher:抄写员 Keywords: Protection function overvoltage protection LED drive circuit RC Updated: 2021/05/27
Resistors R1 and R2 ensure a constant output voltage that does not rise indefinitely by feeding back the output voltage to the error amplifier pin FB. The added circuit can protect the device from being damaged by excessive output voltage. The function of VD2 is to prevent Yang and Rcc from being connected in parallel when the LED module is not connected, and to prevent output overvoltage, because the resistance of R1 is much larger than the parallel value of R2 and Rcc.
Latest Optoelectronic Circuits Circuits
- Measurement and analysis of automatic emergency lighting circuit
- LED Signage with RS232 Port Operation Guide
- LED Flasher circuit using 2 transistors for LED switching
- Design and production of rain control and light control timing controller based on P87LPC764
- One of the water full alarm circuits
- Lighting lamp voltage stabilizing circuit (2)
- SC3071 touch step dimming light circuit
- 4-digit incandescent lamp display circuit
- Large light emitting diode display circuit
- Small current anti-theft alarm circuit
Popular Circuits
- Wien bridge oscillator circuit
- RCM series integrated circuit remote control circuita
- Thermal = electromagnetic long time delay overcurrent release circuit
- Y-△ step-down starting circuit three with protection function to prevent arcing and short circuit
- Preamplifier using current series feedback
- RC reverse motor braking circuit
- RCC complete working circuit
- FCOG6100 delta converter with protection function
- RCC partial resonant indirect control power supply circuit diagram
- RC low frequency oscillator
京公网安备 11010802033920号