Application circuit diagram for driving 5 white LEDs
Source: InternetPublisher:赔钱虎 Keywords: LED power display power supply Updated: 2020/09/14
TPS60230 can drive up to 5 25mA white LEDs; TPS6023 1 can drive up to 3 25mA white LEDs; the main technical characteristics of TPS60230/TPS60231 are as follows.
①The brightness of the white LED can be controlled by the PWM control signal.
② It has adaptive 1x pressure and 1.5x pressure switching modes to achieve high efficiency.
③1MHz conversion frequency.
④Operating input voltage range of 2.7~6.5V.
⑤Built-in soft-start circuit to limit transient inrush current.
⑥Low input ripple and low EMI (electromagnetic interference).
⑦Current overload protection and high temperature protection.
⑧Achieve low-voltage shutdown through hysteresis effect.
⑨They are all packaged in a very small 3mm×3mm QFN package.
The application circuit of TPS60230 driving 5 white LEDs is shown in the figure.
Figure TPS60230 drives five white LED application circuits
- ISO113 circuit that can reduce power consumption
- INA155/INA156 is used to form a single-supply high-side current monitor for detecting load current
- The constant current source composed of two transistors can drive high power
- Switching power supply circuit composition and function introduction of each part
- Principles and precautions of active discharge circuit
- Dual forward converter schematic diagram
- Mc34063 MP3 Switching Charger
- A low-cost, high-reliability battery charger for electric vehicles
- Homemade Electric Bike Fast Charger
- Lead-acid battery overcharge and over-discharge protection circuit
- MAX8631X driving white LED circuit diagram
- Serial dynamic LED scanning circuit
- Dark activated LED flash circuit
- Ordinary optocoupler isolation circuit
- NE555 typical application circuit diagram (2)
- Circuit diagram for using an ordinary TV remote control to control switches of other home appliances such as light bulbs and fans
- 3W high power LED drive circuit diagram
- LM3914 drives 20 LED light-emitting columns circuit diagram
- SAA1064 serial I2C bus LED dynamic driver interface circuit diagram
- Fire emergency light circuit