Multifunctional electronic watch timing socket circuit
Source: InternetPublisher:拿铁三分糖 Keywords: socket multifunctional electronics Updated: 2021/01/16
The working principle of the circuit : the plug is connected to the mains, VT1 and VT1 are turned on, VT2 and VT3 are turned off, and
the LED lights up, indicating that the "timer off" socket has power. When the electronic watch alarm clock sounds the time,
the signal derived from its piezoelectric ceramic chip passes through C. Coupled to VT. Amplify, and then use VD.
After rectification, C2 is charged. When the voltage on c2 is greater than 1.4 V, VTz and VT3 are saturated and turned
on, K acts, the LED goes out, the "timer off" socket is powered off, and the "timer on" socket is powered on
. These two sockets can be used to easily set the "timer on" and " timer off" of home appliances.
- A small improvement to the temperature and water level indicator alarm
- IGBT modules block overcurrent by controlling the gate
- Design and production of wireless multi-location control switch circuit
- Vibration anti-theft alarm circuit
- Rolling door anti-theft device
- Automatic power off switch when power outage occurs
- Voltage regulation and timing dual-purpose controller
- A simple circuit diagram of abnormal mobile phone charging alarm
- Voice-controlled bird circuit
- Electronic doorbell circuit
- Agricultural spraying and insecticide control circuit
- Flashing wall light control circuit
- AM radio automatic search and trigger circuit
- Relay control circuit a
- Detection and control circuit of electromagnetic stove
- Sprinkler control circuit using AC motor
- Temperature detection control circuit of electric hot water bottle
- Micro DC motor steady speed control circuit b
- Micro DC motor steady speed control circuit a
- Multifunctional electronic telephone test device circuit diagram