TDA1510 power amplifier application 02

TDA1510 is an audio power amplifier produced by Philips . The integrated circuit is equipped with load short circuit {load open circuit,
overheating and other protection circuits. It has the characteristics of stable static voltage at the output end , good ripple suppression performance, fewer external components, small size, and
high stability. It can be composed of stereo and BTL power amplifiers. The circuit is shown in Figure 5-3. This function can drive 1.6C1 low-impedance speakers.
The limit voltage is 28V when there is no signal; it is 18V when there is a signal. The normal operating voltage of the port is 6V~18V. Tested at vcc-14, 4V,
, =lkHz, Dingjiang-2 5℃, the closed-circuit gain is 40dB, the two-channel output power is 12W, and the BTL output power is
40W. It is suitable for car radios and stereo radios for audio The power amplifier q
    TDA1510 is basically the same as the TD A15 15 in appearance and structure. The only difference is that the ① pin of TDAIS-Jc 5 is connected to a
4 7t, F electrolytic capacitor to the ground as a speaker protection 6. Its two-channel typical amplification circuit is shown in Figure 5 -3. A typical BTL amplifier circuit
is shown in Figure 5-4.