Self-excited electrification-short circuit braking circuit 2
Source: InternetPublisher:已注销 Keywords: Braking circuit BSP electric motor Updated: 2020/01/24
The circuit is shown in Figure 3r156. It adopts automatic control mode.
When stopping, press the stop button SB2, the contactor KMi is released, the capacitor C circuit is connected , and the motor enters the self-excited
electric braking state. After a delay, KMz pulls in, the three-phase stator windings are short-circuited, and the motor enters the energy consumption braking state.
Release SBz, KT and KMz are both released, and the braking process ends.
- Controlling LEDs with Node-RED in Raspberry Pi
- Build a glove-controlled robotic arm
- How to make a wheeled self-balancing robot using ultrasonic sensors
- How to Make a Hot Tub Smart and Remotely Operated with a Raspberry Pi
- Motor automatic cycle control circuit
- Controlling stepper motors with wireless remote control transceiver and PE-51 board
- Working principle of ZNB-S digital display intelligent motor protector control circuit
- Starting method of asynchronous motor with external frequency-sensitive resistor
- Infrared blocking alarm device
- Infrared detection alarm
- Pulse therapy circuit
- Egg warming circuit
- Peanut and melon seeds roasting machine circuit
- Rural vegetable greenhouse lighting circuit
- Crabo oscillator circuit
- Broadband high frequency power amplifier circuit
- Voltage series negative feedback amplifier circuit
- Second-order active band-stop filter circuit
- Wireless microphone circuit
- Sawtooth wave generator circuit (1)