How to deal with the situation when the corresponding type of Flash cannot be found when using Keil for STM32 development

生非死惧

How to deal with the situation when the corresponding type of Flash cannot be found when using Keil for STM32 development [Copy link]

1. When developing STM32 with Keil5 software, you need to install the corresponding device library .pack file. However, during development, you will often encounter the problem that the relevant flash cannot be found in the Flash. As follows: The solution is as follows: 1. Install the corresponding device library, such as the STM32F4 series device library file Keil.STM32F4xx_DFP.1.0.8.pack (the corresponding file can be downloaded online). Next, it is very simple, I will not say more. 690/006W8APWzy7ffSE8IHgea&690[/img][/url] 2. After the device library is installed, (at this time, the problem may have been solved), remember the installation path above, open that installation path, there is a Flash folder in it, which contains many .FLM files, this is our protagonist. 6. Copy and paste the .FLM file mentioned above into the ARM --- Flash folder in the installation directory. 0)] 4. At this point, the problem has been solved. Open the Keil software again, and you can see that the corresponding Flash model just added is available. Jsut Over. 2. If the device in the software cannot find the corresponding device. Then install the corresponding device library, then close the software and reopen it. This content is originally created by EEWORLD forum user 生非死恐. If you need to reprint or use it for commercial purposes, you must obtain the author's consent and indicate the source