Kintex XCKU060 high performance PCIe carrier board based on FMC

七七爱电子

Kintex XCKU060 high performance PCIe carrier board based on FMC [Copy link]

1. Board Overview

The main control chip of the board uses Xilinx's Kintex UltraScale series FPGA XCKU060-2FFVA1156. It has two 64-bit DDR4 SDRAMs onboard, each with a capacity of 2GB, and can run stably at 2400MT/s. It supports PCIE Gen3 x8 mode and one FMC HPC interface. It also provides Windows and Linux host computer drivers.

2. Main specifications

50. Onboard main processor XCKU060-2FFVA1156I;
50. Two sets of 64-bit DDR4 SDRAM, each with a capacity of 2GB;
50. FPGA uses BPI loading mode
50. The FMC interface provides 20 pairs of GTH and LA signals (non-FMC+ connector);
50. Reserve JTAG and 12 expansion IOs, LVTTL 3.3V level;
50. Supports using EEPROM to store data;
50. Power supply sequencing and total power consumption monitoring;
50. Onboard temperature sensor;
50. Support Micro USB to serial port conversion;
50. Support PCIe 3.0 X8 interface and high-speed data interaction with PC;
50. Supports separate 12V power supply (independent of PC);
50. Standard PCIe full height and half length 167.5 * 111 mm.

3. Product Application

50. AD acquisition board, AI accelerated computing, fiber optic extension, and image processing.

4. Software Support

50. Hardware, design tools, IP, and pre-verified reference designs;
50. Demonstrate DDR IP software, PCIe XDMA transfer;
50. FMC daughter card demonstration program.

emma2015

Supports PCIE Gen3 x8 mode and one FMC HPC interface. Windows and Linux host computer drivers are also available.