[Sipeed BL808 all-round board] Some application examples of the camera

流行科技

[Sipeed BL808 all-round board] Some application examples of the camera [Copy link]

 

Let's take a look at the demos provided. Many of them are related to camera cases. I am more interested in the one that pushes the stream via WIFI, but the experiment was unsuccessful. Later, I also tried other cases. It can be seen that the camera is now a very important component. It can be used to take pictures and then process the images. There are examples of such cases.

The code is also very concise. It basically initializes the camera, then initializes the wifi, connects, etc., and then its port and so on.

I imagined that after flashing, it should be connected to our WIFI, then assigned an IP, and then accessed through the IP to display the image transmitted back by the camera. However, this is not the case.

You can see that it is connected, but it cannot be accessed when entering the IP. http://module IP address:8888/

Then I tested the second demo, uvc_demo, which is much more convenient, and can directly simulate a USB camera through the OTG port.

It’s directly the camera, and you can directly enter the camera to see the display.

Jacktang

Some application examples of these cameras can be collected