8650 views|7 replies

252

Posts

1

Resources
The OP
 

How to connect the power cord and ground wire when charging a lithium battery using a USB-TYPE-C interface? [Copy link]

I use TP4056 to charge a lithium battery. The interface uses a 6-pin USB-TYPE-C female socket. How should I connect the power and ground wires? Which wires do I need to connect?

This post is from Analog electronics

Latest reply

You want to ask about the function definition of this pin?   Details Published on 2019-8-12 21:46

875

Posts

1

Resources
2
 

VBUS is the power supply, and GND is the ground line. You can also define it yourself, but then you have to make the line yourself.

This post is from Analog electronics

Comments

Do I just need to connect VBUS and GND?  Details Published on 2019-8-12 13:29
 
 

252

Posts

1

Resources
3
 
Cao Wei 1993 posted on 2019-8-12 13:05 VBUS is the power supply, and GND is the ground. You can also define it yourself, but then you have to make the wires yourself

Do I just need to connect VBUS and GND?

This post is from Analog electronics
 
 
 
 

1w

Posts

25

Resources
4
 

Generally, you also need to connect CC1 and CC2 to the ground through a 5K1 resistor so that the host can recognize the device. If it is only powered and the current is small, it may not be connected.

This post is from Analog electronics

Comments

Got it. Thanks.  Details Published on 2019-8-12 21:29
 
 
 
 

2w

Posts

341

Resources
5
 

For the chip, pin 4 is the positive input terminal of the input voltage, and pin 3 is the ground terminal.

Pin 5 is the positive pin of the battery

This post is from Analog electronics

Comments

OK, thanks  Details Published on 2019-8-12 21:30
 
 
 
 

252

Posts

1

Resources
6
 
dcexpert posted on 2019-8-12 13:59 Generally, you also need to connect CC1 and CC2 to the ground with a 5K1 resistor so that the host can recognize the device. If it is only powered and the current is small, it may be okay not to connect...

Got it. Thanks.

This post is from Analog electronics
 
 
 
 

252

Posts

1

Resources
7
 
qwqwqw2088 posted on 2019-8-12 16:12 For the chip, pin 4 is the positive input terminal of the input voltage, pin 3 is the ground, and pin 5 is the positive terminal of the battery

OK, thanks

This post is from Analog electronics
 
 
 
 

605

Posts

0

Resources
8
 

You want to ask about the function definition of this pin?

This post is from Analog electronics
 
Personal signature

承接各类型开关电源项目外包设计,特殊定制亦可。

qq:2165311923;tel:15179604830(微信同号);

E-mail:weilin1688@126.com

 
 
 

Guess Your Favourite
Find a datasheet?

EEWorld Datasheet Technical Support

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号
快速回复 返回顶部 Return list