-
Voltage jump problem
The pressure sensor I use is connected to this circuit. When no load is applied, the pressure difference between IN1+ and IN1- is 0.1mv.
The voltage on both sides of C90 keeps jumping between 57mv and
-
【Silicon Labs Development Kit Review】1-Introduction to Main Components
[i=s]This post was last edited by dingzy_2002 on 2021-9-10 16:26[/i]Thanks to EEWORLD admin for giving me this opportunity to review Silicon Labs EFM32PG22 development kit.
In fact, the kit has been i
-
MCU Basics: Detailed explanation of button single click, double click, and long press
Preface: Many people are careless when learning microcontrollers, and many routines are just knowing what they are, but not why they are. This is actually hurting yourself. It is very convenient to us
-
ti dsp (tms320VC5502) + isp1581 usb2.0 high speed data acquisition solution
TI C5000 DSP has the characteristics of low power consumption, high performance and low cost. Among them, TMS320VC5502 has a clock speed of up to 300M, can expand 2MB of sdram, has rich interfaces, 16
-
[Problem Feedback] Anlu TD4.6.6-64bit pin constraint input PIN number bank does not automatically update the problem
I have encountered this problem several times before, that is, when continuously constraining some I/Os, the bank will not be updated when entering the PIN number. At first, I suspected that I had ent
- Tesla's electric motor
- Design of prison security system by integrating wireless sensors with control network
- Fast charging knowledge sharing: PD protocol fast charging
- Solution of power monitoring system of Zhongjun Yunjingtai in Shangqiu, Henan
- [Voice Recognition Positioning] Material Unboxing-ESP32-S2-KALUGA-1