Question: Why does it say "Since the voltage drop U CE0 of T 0 is equal to the voltage between it and the be-side U BE0 , T 0 is guaranteed to work in the amplification state "? Shouldn't the transist
1. Experimental tasks Use P1.0-P1.3 of the microcontroller to connect four light-emitting diodes L1-L4 to indicate the current count data; use P1.4-P1.7 as the input end of the preset data, connect fo
IS61LPS51236A DATASHEET is as follows:The above picture is a SSRAM module diagram, which clearly shows the relationship between the various SSRAM pins. The following picture explains the pin functions
[size=3]When downloading the OK6410 bare metal program, a tftp server was used. When configuring it, I still encountered many pitfalls (although there are many tutorials). The main problem was that th
[i=s]This post was last edited by damiaa on 2017-7-31 09:30[/i] Let's play thread + multi-channel relay control. At present, the relay still uses LED instead of display, which is not so scary, because