Against the backdrop of the United States' successive sanctions on Huawei chips, the importance of accelerating the development of its own core technologies has become more prominent. Recently, the St
VCC is equal to 5V, and the input Vi is a small sinusoidal signal (for example, the signal is 0~1V). How to adjust this circuit (if one transistor is not enough in the circuit, you can add another one
[i=s]This post was last edited by Aguilera on 2020-10-11 20:49[/i]Configurable Logic Blocks (CLBs) reduce overall system cost and increase functionality by integrating external logic into C2000 microc
In this flyback power supply, the X pin is used for current limiting, and the V pin is used for overvoltage detection. When nothing is set, there is no voltage output at the output end of C16 when the
[i=s]This post was last edited by Beifang on 2019-7-16 15:52[/i]1. The reading and demonstration of all sensor data based on Nucleo-L476L mainly demonstrates the reading and output of all sensor data
[i=s]This post was last edited by icefire2012 on 2018-9-16 20:53[/i] According to the test plan, micropython needs to be ported to the Raspberry Pi to control hardware. I downloaded the source code of