I cannot set the static operating point properly. According to the data, when IB is about 10uV and VCE is about 8V, the IC should be more than 4MA. Why is it inconsistent with the simulation result? I
Basic requirements for LCD display design based on atmega128: 1 Input data from the keyboard through the virtual terminal, and display the received data on the LCD screen. 2 Change the display mode by
A switching power supply with an input power of 12W, the input filter capacitor is 47uF/400V. When the capacitor is powered on, it charges and generates a large current. In order to prevent this cur
[color=#000][font=Arial]In layman's terms, the emulator is used to debug the simulation, and the programmer is used to burn the target code to the MCU during mass production. [/font][/color] [color=#0