• Duration:13 minutes and 24 seconds
  • Date:2019/03/20
  • Uploader:抛砖引玉
Introduction
keywords: h265 IP
H.265 Video Encoder IP Core is an open source H.265 hardware video encoder that implements most of the functions of H.265 (or HEVC). It was developed by the research team of Professor Fan Yibo of the Video Image Processing Laboratory (VIP Lab) of the State Key Lab of ASIC & System, Fudan University, and is open source. Any organization or individual can use the above code for research and production purposes free of charge, and VIP Lab will continue to update and maintain the development of the H.265 hardware video encoder.
Unfold ↓

You Might Like

Recommended Posts

Ask about watchdog
There is a sentence in the MSP430F4XX User's Guide:When using the WDT in the watchdog mode, the WDTIFG flag sources a resetvector interrupt. The WDTIFG can be used by the reset interrupt serviceroutin
zhangwenyi Microcontroller MCU
The first startup task of ucos calls OSStatInit and then delays for 1s
After the first startup task of ucos (only this one user task is created) calls OSStatInit, will there be a delay of 1s before entering the for loop of the task?
woshiyulei Real-time operating system RTOS
==Q: Is there any special requirement for SIM card when connecting to the Internet via GPRS or CDMA module?==
The CDMA Unicom service hotline said that a World Wind SIM card is required. Then GPRS also requires a special SIM card.
futterfly Embedded System
[Serial] [Starlight Lightning STM32F407 Development Board] Chapter 10 Serial Communication Experiment
Chapter 11 Serial Port Communication Experiment 11.1 Purpose Through this experiment, you will master the use of STM32 serial port and realize sending and receiving data through the serial port. For t
hejecu stm32/stm8
How was the first IRP generated?
For example, when you click the left button of a USB mouse, the hardware bus will receive an electrical signal after the left button is pressed and released. What happens next? Which program first pro
robber200011 Embedded System
FPGA Timing Report Interpretation
I got the following timing report in the ISE synthesis tool: Minimum period: 6.761ns (Maximum Frequency: 147.913MHz) Minimum input arrival time before clock:3.383 Maximum output required time after cl
nanaless44 Embedded System

Recommended Content

Circuit

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号