• You can log in to your eeworld account to continue watching:
  • Fourier transform of non-periodic signals (3)
  • Login
  • Duration:33 minutes and 55 seconds
  • Date:2017/10/09
  • Uploader:老白菜
Introduction
This course combines the contents of the two courses "Signals and Systems" and "Digital Signal Processing" to provide you with the key to the world of signal processing. Starting here, you will explore the mysteries of signal decomposition with Fourier, and build a bridge between continuous and discrete signals with Nyquist. Teaching resources such as full lecture videos, signal processing cases, answers to exercises, expert lectures, experimental videos, etc. will accompany you to explore the world of signal processing easily and happily.

Unfold ↓

You Might Like

Recommended Posts

How to calculate the multiple of photodiode amplifier circuit?
First, here is the picture. This is a photodiode amplifier circuit, which consists of two stages of amplifier circuits. The front stage amplifier circuit is an I/V conversion, which is relatively easy
反倒是fdsf Analog electronics
About TMS570LS Series
I would like to ask you, where can I find the header files for the TMS570ls series? There seems to be no download location on the official website! Thank you, can anyone answer this question?
lijianglian Microcontroller MCU
Help: F2811 cannot be programmed
Hello everyone: When I use F2811 to program, except for the unlock button, all other options are gray and inoperable when I open the program dialog box. Please help me! Urgent!!!
lxzygz Microcontroller MCU
How should the chassis ground of a high-speed interface connector be designed?
Hello Expert,I used USB-UART and ETHERNET on my PCB, but found that their reference design circuits were somewhat different, especially the chassis ground part. Figure 1 is the GND design of USB-UART
RobertLiang PCB Design
SX1278LORA Module FAQ
Q: What is the LoRaWAN data rate? A: For LoRa, the LoRaWAN data rate ranges from 0.3kbps to 11kbps, and the GFSK data rate in Europe is 50kbps. In North America, the minimum data rate is 0.9kbps due t
Jacktang Wireless Connectivity
Extending Battery Life with LDOs, Voltage Supervisors, and FETs
Extending battery life through LDO, voltage supervisor and FET Reprinted from: deyisupport Extending battery life is a common design requirement in various applications. Whether it is a toy or a water
okhxyyo Analogue and Mixed Signal

推荐文章

MathWorks 宣布推出 MATLAB 和 Simulink 的 2024b 版本 加速信号处理应用开发的新 App 和功能 2024年09月12日
中国 北京,2024 年 9 月 12 日 —— 全球领先的数学计算软件开发商 MathWorks 今日发布 MATLAB® 和 Simulink® 产品系列版本 2024b(R2024b) 。R2024b 推出了几项重要更新,帮助从事无线通信系统、控制系统和数字信号处理应用的工程师和研究人员简化工作流。 图注:DSP HDL Toolbox™ 为开发信号处理应用提...
TLV32AC56/57音频信号处理器介绍 2024年08月12日
给缓冲放大器变固定电平信号,然后再经去噪后送给带通滤波器。在压展工作模式下,滤波器输出信号应送给压展A/D转换器。 接收部分有压展和线性两个D/A转换器,分别用于转换从DIN输入的串行数据。所得的模拟信号送到隔离电容滤波器以滤除带外信号。滤波器同时提供(SinX)/X校正以使信号平滑。其输出信号将直接供给耳机放大器,该放大器的增益是可调的,并能提供低功耗的差分输出。 TL...
基于Clarity CVC-HFK免提开发平台的车载信号处理与音频系统 2024年07月25日
回声消除(AEC)可实现汽车内舒适的全双工免提通话,本文介绍的Clarity CVC-HFK 可提供集成的单扩音器解决方案( OMS)噪声抑制算法。 它支持自适应噪声消除功能,可降低麦克风(传入)信号中的环境噪声,并提取所需的语音,还可向远端用户传输清晰的话音(传出)。 两个因素决定了使用免提蜂窝电话系统的必要性,首先是由于目前的蜂窝电话系统的终端多为手持的,这就给司机造成了...
浅谈基于色控技术的电视氛围灯方案 2024年07月09日
氛围灯从名词上解释又称为LED 氛围灯,是一种主要用于主题公园、酒店、家居、艺术照明中为人们需求创造氛围的LED 灯,氛围模式可以根据场景需要通过调整LED 灯的颜色、亮度、频率来实现。电视氛围灯目前基本上都是将氛围灯灯带通过双面胶贴在电视后壳上,通过墙面反射的形式呈现给人们一种视觉上的享受。本文就现有电视的色控氛围灯方案进行探讨,对比现有技术以及应用方案的优劣势,以便后续选...

Recommended Content

Circuit

可能感兴趣器件

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号