"FreeRTOS Source Code Detailed Explanation and Application Development: Based on STM32" is supplemented by a large number of routines to comprehensively explain the principles and source code of FreeRTOS. The main content includes task management and task scheduling, system reduction and configuration, time management, queues, semaphores, software Timers, event flag groups, task notifications, low-power Tickless mode, idle tasks and memory management, etc. At the same time, "FreeRTOS Source Code Detailed Explanation and Application Development: Based on STM32" is equipped with a large number of illustrations, which is a good choice for those who want to learn the principles of RTOS systems in depth.
General guidelines: 1. Avoid using the compiler switch -r to clear registers. This is very resource intensive and can degrade code quality. Allow the compiler to allocate register variables. Clear reg
[font=微软雅黑]I made a smart trash can. To do the Internet of Things, it needs to be connected to a mobile terminal. Who can do it in Zibo? If you have any, please contact me at 18105338426, Ms. Qiao[/fo
DSP is a high-performance digital signal processor. Due to its fast computing power and powerful information processing capabilities, it is widely used in industrial automation, national defense resea
As the title says. The voltage across the load is not 0 (the voltage difference across the load is about 0.6V, the high voltage end is 11V and the low voltage end is about 10.4V). I want to use MAX197
digitalWrite(TrigPin, LOW); //Send a short pulse to TrigPin delayMicroseconds(2); digitalWrite(TrigPin, HIGH); delayMicroseconds(10); digitalWrite(TrigPin, LOW); Why are the delay times of high and lo
[size=4]The factor Q is an important parameter to indicate the quality of the coil. The size of the Q value indicates the size of the inductor coil loss. The larger the Q value, the smaller the coil l
Security Electronics
京公网安备 11010802033920号
