[i=s]This post was last edited by benny512 on 2017-12-21 17:54[/i] I recently found a LM333K product. Seeing that the schematic diagram of LM333K is simple, I decided to build a small circuit to measu
[i=s] This post was last edited by huo_hu on 2015-8-10 08:49 [/i] Wind pendulum, lithium battery + fan + gyroscope. The complete system is placed on the pendulum table. 1. Maintain the angle. 2. Draw
I got a circuit and applied it, but I don't know its principle. The triode works in Class C state. The requirement is to change L2, L3, L4, C4, C7, C8, or the transformer ratio, and require R10 to obt
[align=left][color=#000000]Network labeling is a very common function in schematic design and PCB design using AltiumDesigner software. The more complex the circuit, the more it exists. However, the p
I made my own stlink and added a small module for USB to serial port. I just finished making the PCB and haven't debugged it yet.Related information is as follows:
The Stellaris ADC module has a conversion resolution of 10-bits and supports 4 input channels, as well as an internal temperature sensor. The ADC module contains a programmable sequencer that can samp