This online seminar will introduce Microchip's latest software development platform based on SAM and PIC32 microcontrollers - MPLAB® Harmony V3, and provide an in-depth analysis of how MPLAB Harmony V3, as a unified and powerful content development and delivery environment, will use a set of optimizations peripheral libraries, simplified drivers, and modular software downloads to enhance engineers’ experience in application development and accelerate project development.
The LMS ( least mean square ) algorithm has been widely used in the fields of adaptive filters, adaptive antenna arrays, etc. due to its fast convergence speed and simple algorithm implementation. In
The question is this: I just checked the information. I found that I need to add a pull-up resistor to the microcontroller pin. Connect to the base of the transistor, and then control the relay. But s
The serial port sends data one bit at a time and receives data one bit at a time. Excluding the start bit and the stop bit, there are only 8 bits of data left. When 8 bits of data are received, an int
[code]void main(){ uchar a = 0, b = 0, c = 0; float f = 123.456; a = f; f = f - a; f = f * 1000; b = (uchar)f;_nop_(); b = ((uchar)f / 100); //??? while(1) {a++;b++; }}[/code]
EEWORLD has been carrying out the activity of exchanging Chip Coins for AVR Learning Board + USB Programmer for half a month. At present, 12 friends have exchanged for the corresponding learning board