This video uses the Zhengdian Atom development board as the platform. It will lead everyone to learn the various functions of the STemWin graphical interface from the simple to the deep, start a new STemWin journey for you, and explain the transplantation of STemWin and the use of various controls.
I want to learn ARM embedded development but I don't know where to start. I have a few questions for beginners: 1. What tools and equipment are needed for ARM development? What is the specific process
1 Test platform: EK-TM4C1294XL, ARM model: TM4C1294NCPDT. 2 Purpose: Set the BOOTCFG register so that when the PA6 pin is high, the ARM will enter the bootloader in the ROM. 3 Test program: Use the bl
[i=s]This post was last edited by jameswangsynnex on 2015-3-3 20:04[/i] 1. If you are doing manual soldering, you should develop good habits. First, before soldering, you should visually inspect the
I wrote the following program to measure the temperature of two 18B20s in series and display them on 12864. But I can't get the result. Only one of the temperatures can be displayed on 12864. I have t