Have you ever encountered this situation - MLCC (Multilayer Ceramic Capacitor) measurements are either low or out of spec.
In fact, it is very likely that you took the wrong step in the first step of testing...
In the video below, Digi-Key engineers will tell you "why" and teach you step by step how to correctly test MLCC.
LED Indicator
The development board base has one power indicator LED0 (next to the power socket), and three user-programmable indicators, LED1, LED2, and LED3. The schematic diagram is as follows:butt
- Want to learn MSP430, but can't find systematic learning resources or can't learn it at first glance? Waiting for an expert online to guide you step by step;
- I don't have much time to explore MSP4
I would like to contribute the software I wrote myself . It is a good tool when designing temperature sensors with NTC. 1. Parameter settingNTC related parameters: R25, B must be set according to the
Hello, experts. I have bought a development kit under TI's simpliciTI protocol, but now I want to switch to zigbee protocol for development. Therefore, I want to draw two Smart RF05 BB boards myself,
First of all, I apologize for opening your door without your consent. However, compared with my peers, I am still quite particular. When opening the lock, I did not use destructive tools such as elect
This idea came to me when I first came into contact with microcontrollers. At first, I wanted to make a wireless acquisition device for the temperature and water level of a solar water heater. The mot