Including clocks, generated components, etc., such as adding API templates, setting component parameters, creating symbols, adding Library Dpendency, creating circuit diagrams, etc.
[i=s]This post was last edited by dcexpert on 2020-10-1 20:19[/i]A few months ago, I bought a USB 3.0 usb hub control board online. It only had the mainboard but no shell. Although it can be used, the
The first time I used STM8S001J3, I mainly used UART and EEPROM. At that time, I saw that UART_TX conflicted with SWIM, and then I saw that it could be mapped to PA3, so I did the mapping. After the b
Mainly for high-precision measurement AD. 1: The reference voltage needs to be accurate enough, and it is recommended to use an external high-precision reference voltage. 2: If the PGA is adjustable,
[size=4]From my personal experience, the most effective method is: [/size] [size=4] [/size] [size=4]1. Is the resistance of the amplifier circuit too large? For example, I have seen a circuit that amp
[i=s] This post was last edited by Yunhu Congbai on 2022-4-29 08:59 [/i] ## Preface I took a quick look at the information of GD32L233 before, and it supports SLCD driver, so I happily bought a bare s