12 Steps to Building a Laser Safety System

Step 1: Build the circuit;

Step 2: Disassemble the camera;

Step 3: Solder wire terminals;

Step 4: Assemble the camera;

Step 5: Built-in circuit in the soap box;

Step 6: Connect the circuit to the battery;

Step 7: Connect additional voltage relay;

Step 8: Cut the hanger;

Step 9: Place the camera;

Step 10: Place the laser baton

Step 11: Place the mirror;

Step 12: Test the system.

• Chapter 1：12 Steps to Building a Laser Safety System (4 minutes and 3 seconds)