Atmel ARM-based Embedded MPUs - ARM Cortex-A5 and ARM926EJ-S based embedded MPUs are easy to use and ideal for cost-sensitive applications. Features include: Performance up to 850DMIPS operating at 536MHz, floating point unit (FPU) and Neon for faster data processing and improved accuracy. Market-leading low power consumption, consuming less than 150 mW when running at maximum speed and less than 0.5 mW when running in low-power mode. Powerful peripherals including USB high-speed hosts and devices, Gigabit Ethernet, CAN, TFT LCD controllers, camera interfaces, and more. Robust and reliable security features thanks to hardware encryption engine, secure boot, external DDR encryption, tamper pins, ARM Trust Zone and more. Free Linux and Android distribution packages and a comprehensive partner ecosystem for additional hardware and software solutions.
Dear experts, I don't understand the two circuits above. The three-wire temperature measurement is to avoid the influence of line resistance. In the constant voltage circuit above, pt100 obviously has
The GD32VF103 series MCU uses the new Bumblebee processor core based on the open source instruction set architecture RISC-V. It is a commercial RISC-V processor core independently developed by Gigadev
The IIC.c file defines the interface between AT24C02 and MCU, and constructs the underlying functions of the IIC protocol, including the host start, stop, response, non-response, read, and write funct
This is a circuit, but in actual use, the G pole is high level, the voltage across the relay is 4.8V, and it cannot be attracted, which is very embarrassing. Can you please give me some advice on how
Hello everyone, I am Xiaoyi.Speaking of MOS tubes, some people's minds may be a mess, and there are a lot of words in the books. Today, Xiaoyi will introduce the most commonly used NMOS in MOS tubes f