What to do if there is no sound from the multimedia speakers
There are several reasons why multimedia speakers have no sound:
1. Check the input audio signal to see if it is not plugged in properly.
2. There is a problem with the audio cable. Try another one.
3. There is a problem with the power amplifier integrated circuit
4. Check the speaker connection cable
5. Check the speakers
If household appliances are not used for a long time, they will often get damp. It is better to open them frequently and use them. This situation may also be related to the quality of the audio system. Therefore, you must do your homework before choosing an audio system, listen to other people's suggestions, or go and try it directly. When choosing, I can give you some good suggestions for reference. First of all, let me tell you about BOSS and Maibo. The price of BOSS is ridiculously high, and the effect is not obviously proportional to the price. Some Maibo uses power-paired tubes, which have high power and are very shocking when watching movies, but the sound is not delicate enough. BT-audio Fengjin home theater will not have such problems. Fengjin is a classic sound quality home theater with pure British sound. The mid-bass unit adopts the integrated unit technology of gold cone and honeycomb basin. The mid-low frequency is strong and powerful, the sound directionality is particularly good, more condensed, clearer, and thicker, and the accurate sound phase and compact surround sense allow the listener to experience the wonderful sound field effect.
How to connect multimedia speakers to mobile phones
Whether the multimedia active speaker can be connected to the mobile phone depends mainly on whether there is an audio signal input interface on your multimedia active speaker, such as: AUX socket or lotus interface. If there is, you can connect it. Or whether the multimedia active speaker has Bluetooth function. If it has, you can directly search and pair it. If it does not have Bluetooth function, then you can buy an independent Bluetooth receiver on the Internet and then plug it into the USB flash drive. The connection method is as follows:
1. AUX jack, also known as headphone jack, can be connected to the multimedia active speaker with a 3.5MM audio cable at one end and to the mobile phone at the other end.
2. Lotus interface, that is, RCA socket, use a two-part audio cable, one end is a 3.5MM headphone plug, and the other end is two RAC lotus female sockets, connect it to the lotus interface on the multimedia speaker.
Classification of multimedia speakers
There are different styles of multimedia speakers according to different classification methods. Let's take a look at some common classifications:
●According to the different materials of the box, the most common ones are plastic and wooden boxes.
●According to the number of speaker units, there are single speaker units (full-band units) and double (or triple) speaker units (two or three-way).
●According to the number of channels, there are 2.0 type (two-channel stereo), 2.1 (two-channel plus a subwoofer channel), 4.1 type (four-channel plus a subwoofer channel), and 5.1 type (five-channel plus a subwoofer channel) speakers.
● According to the structure of the speaker unit, there are ordinary speaker units, flat speaker units, aluminum ribbon single speaker units, etc. Note: Ordinary speaker units can be divided according to the different materials of the diaphragm (paper cone), such as the mid-bass unit has paper cone, wool cone, PVC cone, polypropylene cone, metal cone... and other materials, the tweeter has metal dome, soft membrane dome...
●According to the computer output port, there are ordinary interface (sound card output) speakers and USB interface speakers.
●According to the internal and external power amplifier, there are active speakers (most common with built-in amplifier) and passive speakers (external amplifier, only used for very high-end or special requirements).
●By price, it is generally believed that speakers with a price of less than 200 yuan per pair (excluding subwoofers, the same below) are ordinary speakers, speakers with a price between 200 yuan and 800 yuan per pair are mid-range products, and speakers with a price of more than 800 yuan are generally high-end products (of course, this cannot be an absolute classification, it also depends on the brand and actual performance).
●According to the purpose, there are general-purpose speakers, speakers mainly for entertainment purposes (games, VCD, DVD and music appreciation) and professional-purpose speakers (HIFI production, audiophile music appreciation).
Previous article:What does h265 encoding mean? What is the difference between H265 encoding and H264 encoding?
Next article:How to connect passive speakers_How to choose the amplifier for passive speakers
- Popular Resources
- Popular amplifiers
- Huawei's Strategic Department Director Gai Gang: The cumulative installed base of open source Euler operating system exceeds 10 million sets
- Analysis of the application of several common contact parts in high-voltage connectors of new energy vehicles
- Wiring harness durability test and contact voltage drop test method
- Sn-doped CuO nanostructure-based ethanol gas sensor for real-time drunk driving detection in vehicles
- Design considerations for automotive battery wiring harness
- Do you know all the various motors commonly used in automotive electronics?
- What are the functions of the Internet of Vehicles? What are the uses and benefits of the Internet of Vehicles?
- Power Inverter - A critical safety system for electric vehicles
- Analysis of the information security mechanism of AUTOSAR, the automotive embedded software framework
Professor at Beihang University, dedicated to promoting microcontrollers and embedded systems for over 20 years.
- Innolux's intelligent steer-by-wire solution makes cars smarter and safer
- 8051 MCU - Parity Check
- How to efficiently balance the sensitivity of tactile sensing interfaces
- What should I do if the servo motor shakes? What causes the servo motor to shake quickly?
- 【Brushless Motor】Analysis of three-phase BLDC motor and sharing of two popular development boards
- Midea Industrial Technology's subsidiaries Clou Electronics and Hekang New Energy jointly appeared at the Munich Battery Energy Storage Exhibition and Solar Energy Exhibition
- Guoxin Sichen | Application of ferroelectric memory PB85RS2MC in power battery management, with a capacity of 2M
- Analysis of common faults of frequency converter
- In a head-on competition with Qualcomm, what kind of cockpit products has Intel come up with?
- Dalian Rongke's all-vanadium liquid flow battery energy storage equipment industrialization project has entered the sprint stage before production
- Allegro MicroSystems Introduces Advanced Magnetic and Inductive Position Sensing Solutions at Electronica 2024
- Car key in the left hand, liveness detection radar in the right hand, UWB is imperative for cars!
- After a decade of rapid development, domestic CIS has entered the market
- Aegis Dagger Battery + Thor EM-i Super Hybrid, Geely New Energy has thrown out two "king bombs"
- A brief discussion on functional safety - fault, error, and failure
- In the smart car 2.0 cycle, these core industry chains are facing major opportunities!
- The United States and Japan are developing new batteries. CATL faces challenges? How should China's new energy battery industry respond?
- Murata launches high-precision 6-axis inertial sensor for automobiles
- Ford patents pre-charge alarm to help save costs and respond to emergencies
- New real-time microcontroller system from Texas Instruments enables smarter processing in automotive and industrial applications
- About the problem of transistor driving buzzer
- CCS5.5 cannot debug the chip and is stuck at launch
- Notepad Editor - Verilog Code Snippets and Syntax Checker
- Speed up the development process with STM32CubeMX software
- 【HomeBao】Supplementary experiment for project submission: Connecting HomeBao to HomeAssistant
- 1. Unpacking and running the Helloworld example
- 【Repost】Thirty Practical Experiences in Switching Power Supply Design (Part 1)
- blue_nrg, how to turn off subscription function
- CC26xx product model and suffix description
- AD19, board layer, layer type, what are the uses of each? Please guide