AB inverter using HIM to import/export parameters graphic method tutorial

Import/Export device parameters using the (HIM) Control Panel.

1. Press the "Sel (select key)" to switch to the main menu interface

Memory storage is divided into two parts: device parameters and user settings.

2. Press the up and down keys to select "Memory Storage"

3. Press the up and down keys to select "HIM CopyCat (Control Panel Copy)

Press the confirm button to enter.

Select "Device -> HIM" to export from the device to the control panel. Press the confirm key, rename (default is fine) and press the confirm key again to export.

Select "Device <- HIM" to import from the control panel to the device. Press the OK button to import.

If a three-line display menu appears, find "Standard" in the menu and press the "Confirm" key. After copying, the inverter will alarm and display "F48". Press "Reset".

4. Press the up and down keys to select "Device User Sets". Press the confirm key to enter.

Press the up and down keys to select "Save To User Set". Select the user and select "Yes". Press the confirm key to save.

Press the up and down keys to select "Load Frm Usr Set ". Select the user, and it will prompt "The existing settings are invalid". Press the confirmation key to download .

Note: When importing parameters from the control panel to the device, "Saving Failed" is displayed. This is because the inverter firmware version is different and cannot be imported. You need to use a computer with a serial converter to import parameters.

Professional inverter maintenance

If you need repairs, please contact me

Professional servo motor repair

Professional servo drive maintenance

How to remove the control panel

1. Press the "Esc" key to return the screen to the main screen

2. Press "ALT" first to display Key Is Active key activity.

3. Press the “Confirm Key” to display “Remove HIM” to confirm whether to remove the control panel, and then press the “Confirm Key” again.

4. It will display “Please Remove HIM Now”. Please remove the control panel now.

Note:

1. If the control panel is not removed, the inverter will alarm if the control panel is directly unplugged.

2. After the inverter is powered on and the parameters are entered, wait for the "STS light" to be solid green to be in normal status.

Use the HIM (Control Panel) to view drive parameters.

1. Press the "ALT key" first and then press the "+/-" key to enter the parameter list.

2. Enter the parameter number in Param # (parameter). Press the confirm key to enter. "40.0Hz" is the motor speed. For other parameter numbers, see the parameter list.

List of common parameters (click to enlarge)