How does a digital multimeter measure DC voltage, AC voltage, and resistance?-EEWORLD

Collect

Today I will introduce to you how to measure DC voltage, AC voltage and resistance with digital f15b.

First, let me introduce to you how to use f15b to measure a 9v battery.

The first step: Insert the test leads correctly. This was introduced to you last time and will not be repeated here.

Step 2: Turn the multimeter's rotary switch to the DC voltage position.

Step 3: Use the other end of the test lead to match the positive and negative poles of the 9v battery.

Step 4: The reading of the digital multimeter is the DC voltage of the 9v battery.

Next, I will introduce to you how to measure AC voltage.

Step 1: Insert the test leads correctly.

Step 2: Rotate the rotary switch to the AC voltage position.

Step 3: As shown in the picture: insert the test leads.

Step 4: The reading of the multimeter is the AC voltage.

Finally, I will introduce to you how to use a multimeter to measure resistance.

The first step: The steps are the same as measuring DC and AC voltage, except that the rotary switch must be rotated to the corresponding resistance position. Take a look at the picture below, I believe you have learned it.

Reference address：How does a digital multimeter measure DC voltage, AC voltage, and resistance?

Previous article：Structure and measurement principle of power meter
Next article：How to check whether a multimeter is good or bad

Recommended ReadingLatest update time:2024-11-16 14:55

Section 50: Using ADC0832 to collect voltage signals, using the average method and interval method to perform software filtering

Opening remarks: ADC0832 is a commonly used 8-bit AD sampling chip, which can convert external analog voltage signals into digital signals, and then send them to the microcontroller for conversion, display and other processing. This section will teach you five knowledge points: The first one is the resolution algo

[Microcontroller]

AC/DC power module design with multiple output DC voltages

1 Introduction With the continuous development of science and technology, the requirements for the detection of equipment status are getting higher and higher, which requires the test equipment to provide high-precision and accurate testing. To achieve high-precision and accurate testing, the voltage signal in the t

[Power Management]

AC/DC power module design with multiple output DC voltages

Popular Resources
Popular amplifiers