Detailed description of the 8 characteristics of resistance meters-EEWORLD

Collect

　　The ohmmeter is mainly used to measure the resistance value of resistors. The ohmmeter has the comparator function necessary for component test classification. The ohmmeter can be tested manually or by system application, and can perform fast sampling, temperature compensation and automatic range selection at 16 times per second, and can select versions according to different uses. The reliable connection between the grounding lead of power equipment and the ground grid is the fundamental guarantee for the safe operation of power equipment and the personal safety of operators. This product is an essential testing equipment for the power, telecommunications, petrochemical, railway, metallurgy and other industries.

　　Resistance meter features:

　　1. Powered by dry batteries.

　　2. Use the different frequency small current method to test without AC interference.

　　3. The use of new technologies such as DDS, digital frequency selection, comb filtering, etc. ensures test accuracy.

　　4. Can test pure resistance (equivalent to micro-ohm meter).

　　5. Large capacity data storage.

　　6. Using large screen LCD, the display interface is beautiful and easy to understand.

　　7. Self-recovery over-current/over-heat protection function makes the instrument safer to use.

　　8. Portable design, small size, light weight, easy to carry.

Reference address：Detailed description of the 8 characteristics of resistance meters

Previous article：Five features of visible spectrophotometer
Next article：Matters needing attention when measuring with transformer ratio tester

Recommended ReadingLatest update time:2024-11-17 00:35

Difference between Op Amp and Comparator

Operational amplifiers and comparators are exactly the same. Simply put, comparators are open-loop applications of op amps, but comparators are designed for voltage threshold comparisons, requiring precise comparison thresholds, short output edge rise or fall times after comparison, and outputs that comply with TTL/CMO

[Analog Electronics]

Application of Hysteresis Comparator in Power Supply

The constant current and constant voltage in the power supply are achieved by connecting the op amp to negative feedback. There is also a device with a structure very similar to the op amp, which is used for protection purposes, that is the comparator. There are many types of comparators, the most commonly used

[Power Management]

Application of Hysteresis Comparator in Power Supply

Design of High Performance CMOS Integrated Voltage Comparator

The voltage comparator is a circuit that detects and compares the input signal. Its function is to compare an analog signal with another analog signal (reference signal) and output the binary signal obtained by comparison. It is widely used in devices such as A/D converters, data transmitters, and switching power

[Analog Electronics]

MAX931 comparator is used to monitor the main power supply voltage circuit

The main power supply and backup battery are connected to the load through a simple diode "OR" logic circuit. However, when the battery voltage exceeds the main power supply voltage, the diode "OR" logic circuit will connect the battery power supply and cannot reasonably select the main power supply. The circuit in

[Power Management]

Popular Resources
Popular amplifiers