ADIBF533 serial communication debugging program (has passed the test)

unfold

Recommended ContentMore

Open source project More

Popular Components

Searched by Users

Just Take a LookMore

The actual output voltage of the SEPIC circuit does not match the theoretical value.
As shown in the figure, Vin input is 7~12V; R3=9k ohm, R6=1K ohm;power chip XL6008 (Xinlong), FB pin voltage VFB=1.25. (Measured VFB=1.248V);theoretical output Vo=(1+R3/R6)*1.25=12.5V, but the measure
Transistor push-pull output circuit
I would like to ask, after adding two diodes to compensate for this push-pull output circuit, a slight phase shift occurs. How can I solve this problem?
Sharing of national competition experience
I participated in electronic design competitions when I was in school, but I didn't get any results. Later, I led a team to participate in several competitions after I started working. Overall, my exp
Testing the Kalman Filter
The real temperature test data is measured by heating a basin of water with a heating rod. The X-axis is time in seconds and the Y-axis is temperature: 1) Before filtering2) After filtering (p=10, q=0
Ltspice .save
During simulation, a lot of data is often generated. Some data is useful to us, while some data is just auxiliary and we will not look at it. So how can we ensure that the simulation software only sav
SinlinxA33 development board uses MIPI DSI screen
Install Runhe Neptune Hongmeng system on w801kit
DSPC6678 on-chip storage space allocation mechanism
Ask a silly question about f_mount()!
[Evaluation of SGP40] + Cloud platform configuration for IoT remote monitoring application development

Trending Downloads