ADI-DSP SDRAM Selection and Configuration Guide-Embedded Development-EEWORLD

Recommended ContentMore

Open source project More

Searched by Users

Just Take a LookMore

What parameters should be considered when changing a product from 422 communication to 485 communication?
A: I want to change the communication mode of a product from 422 to 485. I would like to ask my colleagues and TI engineers what factors I should consider, such as the speed?Q: 485 evolved from 422, s
Looking for a chip that can output 1/3 or 1/2 input voltage and 1.5A current
As the title says, the usage is as follows: the input voltage range is 9-15V, the output voltage is 1/3, the output voltage must change with the input voltage (accuracy is greater than 0.1V), the maxi
Is there anything you want to DIY now? What do you lack the most?
Is there anything you want to DIY now? What do you lack the most?
【Scene Reproduction Project Based on AI Camera】Project Submission
[i=s]This post was last edited by walker2048 on 2022-10-29 22:12[/i]Scene Reproduction Project Based on AI Camera Author: Li Long 1. Introduction Name : Scene Reproduction Project Based on AI Camera p
bluenrg-2 cannot connect to other devices directly when it is the host
After successful initialization, the function aci_gap_create_connection is used to connect directly according to the address, but it returns 0x46 BLE_STATUS_NOT_ALLOWED. The connection cannot be succe
Using STM32's MPU (Memory Protection Unit) to implement code isolation and access control
FPGA embedded system design.part1.rar
Playing with Zynq Serial 43——[ex62] Image Laplace Edge Extraction of OV5640 Camera
[NXP Rapid IoT Review] + First try of mobile APP
Working Principle of Transformer

Trending Downloads

ADI-DSP SDRAM Selection and Configuration Guide

Document Introduction