1.6GHz LNA XC2404 Principle Design for GPS In GPS applications, it is usually necessary to place an LNA (low noise amplifier) near the antenna. This is because the GPS signal received from the GPS satellite is very weak and needs to be amplified by the LNA. To achieve this goal, a one-stage LNA (about 15dB) or a two-stage LNA (about 27dB) can be used. Using a two-stage LNA can increase the signal amplification capability, but it will also increase the noise figure and power consumption.
You Might Like
Recommended ContentMore
Open source project More
Popular Components
Searched by Users
Just Take a LookMore
Trending Downloads
Trending ArticlesMore