Those who are learning schematic simulation can watch the video. The introduction of spice model is very detailed in the video, which is good. [hide]attach://487665.rar attach://487666.rar[/hide]
Any peripheral or external interrupt that contains the PIE interrupt source, and its own peripheral interrupt module can also be enabled.PIE recognizes INTx.y, and the bit of PIE interrupt is Latched,
This article mainly introduces the detailed description of the switching between different states during the operation of the terminal device End Device in TI ZigBee protocol stack Z-Stack, and furthe
The second-order voltage-controlled low-pass filter circuit is shown in the figure. R1, C1 and R2, C2 respectively form two first-order low-pass filters, but C1 is connected to the output end to intro
An error occurred when updating the PCB. Please help me find out why. Net s13 exists and is connected to the electrical contacts of the pins. There is no error. Why is the error reported?