Easily design sensor end nodes-Electron circuit-EEWORLD

Recommended ContentMore

Open source project More

Searched by Users

Just Take a LookMore

Has anyone used STM32 to control a digital potentiometer with SPI?
I use the SPI1 of the microcontroller stm32f103 to control the voltage of the digital potentiometer. I refer to the routine of the atom at the right point, but the output is always wrong after the con
My colleague asked me to look at the input voltage range of LM2904 when it is powered by 5V
I think it should be VICR, i.e. the common-mode input voltage range, but my colleague told me it should be the value of the black circle in the VOH row, VCC-1.5, which I don't quite understand. Also,
Download the cheats丨ADI experts talk about 23 key points in using resistors, capacitors, and inductors
Although basic, there are many issues behind passive components that are worth studying in depth. If you don't understand them clearly, you may "turn over" during circuit design. ADI Think Tank has la
Power Conversion Switching Technology (Revised Edition) Core Theory of Power Electronics
Power electronics technology has developed rapidly in many fields such as power systems, new energy generation, electric vehicles, electric traction, and household appliances. Power electronics has be
Analog circuit knowledge: basic usage of triodes
Transistors are the most commonly used basic knowledge of analog circuits. Transistors are semiconductor components that are widely used in circuit design. If you don’t know how to use transistors, yo
Intelligent car infrared tracking problem
What is Ferroelectric RAM (FRAM)?
Serial port monitoring data How do you monitor the communication data between two serial ports (such as the serial port of the main control MCU and the blue...
FAQ_ Regarding the problem that the STEVAL_IDB007V1 evaluation board cannot upgrade the demo program through BlueNRG-1 Navigator
MSP430F169 basic clock configuration code practice

Trending Downloads

Easily design sensor end nodes

Document Introduction