There have been posts before that reflect that when performing UART testing, since the UART interface on the board does not provide power to the development board, two USB cables are required, one for
Although it is just a target reporting device, it is not only used for display, but also has wireless communication and human-computer interaction interface. I have never done interface development in
PMOS tube knowledge. When the gate-source voltage VGS difference is -0.4V, the transistor will conduct.
And if S=2.8V, then G can be turned on when it is less than or equal to 2.4V, and can be turned
[align=left][color=rgb(25, 25, 25)][font="]PROTEL's gold shu slot method: [/font][/color][/align][align=left][color=rgb(25, 25, 25)][font="]It is emphasized that the drawing method shown in Figure 3 b
First, find the TCA module in the Device Resources of MCC.After double-clicking to add the TCA0 module, set the properties of TCA0.Enable Overflow interrupt
Clock Seclection is changed to system clock