The key experiment is essentially to operate the GPIO pins of Lpc1768, but unlike the LED experiment, the key experiment is to read the GPIO pin value. As can be seen from the figure below, when the k
I used the Zhengdian Atom board to test the network port program, and the UDP point-to-point communication was successful. I want to change to broadcast mode and set the target IP address to 255.255.2
[size=4][color=#222222][font="] With the rapid development of USB technology and flash memory technology, the speed and capacity of mobile storage devices are changing with each passing day. However,
When it comes to wifi video transmission, do you first think of the need for a core module with video compression SOC, a huge system, a complex remote server, etc., and the excessive budget cost makes
Some common problems that are easy to occur during the design process:The two CC1 and CC2 pins of the TYPE-C USB of the charging case cannot be short-circuited together, and each must be connected to