In the past, a product of our factory has been produced by CO2 gas shielded welding for bottom sealing and submerged arc automatic welding for surface covering. The use of two process methods requires two workstations, which occupies a large area. The management and storage of welding materials such as welding wire, flux and gas used in the two process methods are costly and inconvenient. In winter production, due to the low temperature of the factory building, cold cracks, large-area mesh pores, undercuts and other defects are prone to occur in production. In order to overcome these shortcomings, the argon-rich mixed gas shielded automatic welding process method was used for welding. Changing two welding processes to one saves one workstation and reduces the floor space. In particular, it solves the welding defects that occurred in previous welding production, improves the formation of the stove seam, and reduces the turning or grinding process after welding. It greatly improves the welding quality, improves labor efficiency, reduces welding costs, realizes civilized production, and takes our factory\'s welding technology to a higher level.
You Might Like
Recommended ContentMore
Live replay: Keysight's small probes, big knowledge, don't let the probes drag down your test results!
Control System Simulation and CAD
MIT 6.622 Power Electronics
Live playback: Wireless networking solution based on Infineon AIROC™ CYW20829 low-power Bluetooth chip
Live replay: ADI & WT·World Health MCU Pain Point Exploration Season: MCU application problems are solved with all our strength!
Open source project More
Popular Components
Searched by Users
Just Take a LookMore
Trending Downloads
Trending ArticlesMore
EEWorld
subscription
account
EEWorld
service
account
Automotive
development
circle
About Us Customer Service Contact Information Datasheet Sitemap LatestNews
Room 1530, 15th Floor, Building B,
No.18 Zhongguancun Street,
Haidian District,
Beijing, Postal Code: 100190
China
Telephone: 008610 8235 0740
京公网安备 11010802033920号
