I used STM32CubeMX to set PB8 and PB7 as I2C pins, but the chip did not work because PB8 is the Boot0 pin by default and the circuit needs to be GND. So I used STM32 ST-LINK Utility to set it up and i
Today, we will share with you the Senmu Leishi switching power supply test project (I). Later, we will continue to share all the test projects in (II) and (III).
1. Power factor and efficiency test1.
I would like to ask, regarding the byte alignment issue, should the variable with more bytes be defined first and the variable with less bytes be defined later?
Live Topic: Microchip Live | Unveiling the ISA/IEC 62443 Safety Standard for Industrial SystemsContent Introduction: As Industry 4.0 and smart factories continue to connect their assets and devices to