Atmospheric pressure, temperature and altitude measuring instrument based on bmp085 air pressure sensor

unfold

Recommended ContentMore

Open source project More

Popular Components

Searched by Users

Just Take a LookMore

Why would the filter added to the final stage cavity be burned?
This is a high-power PW device in the L bandAs shown in the pictureThe design requirements of the filter are also high powerThe picture belowScrewThere are traces of burns in the picture
【Beetle ESP32-C3】GNSS test
Today I tested the GNSS function on Beetle ESP32-C3. The GNSS is VK2828, Beidou + GPS dual-mode, and the positioning speed is relatively fast.The power supply of GNSS is directly from 3.3V on Beetle E
Arteli AT32 uses GPIO to simulate HDMI CEC case
PrefaceThis application note mainly describes a case of implementing a simple HDMI CEC transceiver function based on AT32 GPIO and timer peripherals.Consumer electronic control (CEC) isa function of t
Analyze the cause of tms320c6455 burning
Develop a DSP board, containing two TMS320C6455 chips and a Xilinx FPGA XC5VLX85-FF668. The peripherals include(1) IO expansion chip MAX6957, 5V, connected to FPGA through 74LVC16T245; (2) UART, RS-42
Beacon navigation sound positioning and recognition - microphone array
1. Purpose The microphone array is arranged in an array to focus on picking up the sound signal in the space, so that the picked up sound is enhanced and the effect of long-distance sound pickup is ac
How to make a boost circuit so that the output is equal to the input voltage?
SoC chip debugging experience
Self-powered switch realizes ZigBee transmission
CLUE development board information
How to solve EMI compliance testing problems

Trending Downloads