2103 Undergraduate Group Topic-Electron circuit-EEWORLD

Recommended ContentMore

Open source project More

Searched by Users

Just Take a LookMore

Have you ever thought about using the 3 IO ports of a microcontroller to control 6 LED lights?
Today I saw a toothbrush that uses an 8-pin microcontroller, but it has 6 LED lights, 1 button, and 1 motor. After removing the VCC and GND of the microcontroller, there are only 6 available pins left
The center main control circuit board PCB was finished today and sent to the manufacturer for board making.
The PCB of the central control circuit board was finished today and sent to the manufacturer for board making. Acting according to the plan is a reminder for myself.
Error: Can't route source node of type max_io to destination node ...
Error: Can't route source node "sg" of type max_io to destination node "sg~1" of type max_mcell Has anyone encountered this problem?
STM32 timer triggers ADC to collect data and send it to the host computer
Now our school requires writing a program to realize the timer triggering ADC to collect data and send it to the host computer for drawing I set up a six-byte DMA buffer to store the data collected by
[RVB2601 Creative Application Development] Recording Box
Recording Box1. Project BackgroundThe purpose of this work is to make a simple recording box to record the coughing sound of patients at night, analyze the coughing sound with a certain algorithm, and
Discussing STM32H750 Part 4 (Briefly Talking about CANFD Part 1)
RK903 & RK901 & AP6xxx Series WiFi Module Configuration
EEWORLD University Hall----Design considerations for a robust interface between J6 and vehicle displays via FPD-Link
5 Tips for Converting Embedded Hardware to Software
[Analog Electronics Course Selection Test] + User Experience

Trending Downloads

2103 Undergraduate Group Topic

Document Introduction