LPC1114 User Manual-Embedded Development-EEWORLD

Recommended ContentMore

Open source project More

Searched by Users

Just Take a LookMore

ADS7824 software driver debugging, measured AD value error
When debugging ADS7824, when ADC is not connected to a voltage source, the read value is 0x3437, the calculated value is -0.32V, and when connected to a voltage of 3.3V, the read value is also about -
Differences between SPI, UART and IIC
[size=4]SPI: High-speed synchronous serial port. 3-4 wire interface, independent transmission and reception, can be performed synchronously [/size] [size=4]UART: Universal asynchronous serial port. Co
The hard-to-buy NUCLEO-G474RE
Most of the spot websites have no stock in China When placing an order from several foreign companies that have goods The shipping fee is either more than 200 RMB or more than 100 USD. It's too damn e
Can an analog switch simulate current?
Can an analog switch control a constant current source? In other words, can an analog switch simulate current?
Water level control circuit made using SW08 water level switch
This circuit uses two inductive water level sensors (model SW08) as the core to build a water level control system.The SW08 water level sensor is an external water level sensor. It is directly attache
EEWORLD University ---- IoT Moment: The True Definition of IoT
【NXP Rapid IoT Review】+ Bluetooth Operation (3 Receiving Data)
When the MCU is running, the contents stored in the EEPROM are all changed to FF. What is the reason?
CC2530 General Purpose I/O
RFID technology realizes the scale of hotel management

Trending Downloads

LPC1114 User Manual