EVAL-M3-TS6-665PN evaluation board circuit structure and featuresThe following summary is sourced from relevant public technical manuals of Infineon Technologies.As shown in the figure above, the main
I need help from all the experts. I have this 51 series, but there is no hardware interrupt. I want to realize that when my sensor signal disappears, my contactor is powered on for 2S and then powered
1. The diode has a reverse recovery process from forward conduction to cutoffAdd an input voltage as shown in the figure below to the silicon diode circuit shown in the figure above. During the time 0
[i=s]This post was last edited by sky999 on 2020-3-30 14:37[/i]According to this circuit, I can't read the remote control signal. VCC is 5V, and pin 5 (DO) is always 2.5V. When the remote control is p
Does anyone have the sprc940.zip and sprc941.gz software packages provided by TI? These are the assembler programs for the PRU part of the TMS320C6748 chip. The official interface is no longer availab