Ti C6416 read and write SDRAM port example. Programming environment CCS2.2 version-Embedded Development-EEWORLD

Recommended ContentMore

Open source project More

Searched by Users

Just Take a LookMore

Good information on clock division
Let’s practice together in 2021 + a great year!
2021 is a new start. This year, the electronics industry faces new challenges, both in terms of physical and economic aspects. In general, more consumption and boosting the economy can better serve th
[Project Outsourcing] FPGA-based RAID card design
Project requirements:Develop a redundant disk array card with 4 SATA hard disks based on Xilinx Kintex7 325T, and communicate with the PC through the PCIe 2.0 X8 interface. See the attachedSATA3.0 int
How to use trap and varbind in lwip2.1.2
Previously, I used lwip1.4.1, which had the concept of varbindlist. Each varbind to be sent was combined into a list, and then a trap was sent. Now I am using lwip2.1.2, which does not have the concep
str91 p6.6 p6.7 port always freezes when configuring uart0
stopped external ....by other core It always fails to execute. When I disable GPIO_IPINPUTConneced of pin 6.6, I can send content. But I can't receive. The similar program has been implemented on UART
Effects of ESR and ESL in Decoupling Applications
The new computer I bought can't be turned on, please help
Solution to the failure of IAR programming MSP430
MicroPython sets up a separate factory reset code file
Display community logo on three-color E-Ink Gizmo

Trending Downloads

Ti C6416 read and write SDRAM port example. Programming environment CCS2.2 version