-
FPGA Design Practice (Logic)
FPGA Design Practice (Logic) is aimed at the vast number of FPGA/CPLD beginners. It explains FPGA/CPLD and related basic knowledge from scratch, and uses a motherboard-based learning kit that supports
-
SIMterix-Simplies~4~ Verilog
In the case of mixed integer and analog systems, simulation can only simulate Verilog or analog. If the digital part has only output, it is OK, just edit the voltage source and import the waveform fil
-
[Repost] Discover Schottky diodes in life
[align=left][color=rgb(25, 25, 25)][font="]Our lives are full of technological products, such as televisions, refrigerators, computers, cars, solar street lights, etc. You have seen so many technologi
-
For a 4-layer board, is it possible to lay ground on all 4 layers?
I have drawn a 4-layer board. Can I lay ground on all 4 layers?
From the top layer to the bottom layer, they are Signal1, GND, Power, and Signal2 respectively, but the power layer has a thick power li
-
6. [Learning LPC1768 library functions] Watchdog experiment
The purpose of the watchdog is to generate a reset when an error occurs in the microprocessor. When the watchdog is enabled, if the user does not feed the watchdog within the overflow period (reload t
- [AT32F421 Review] +PWM adjusts fan speed
- 【IOT harmful gas detection equipment based on STM32F7508-DK】Work submission
- 【FAQ】ST wide bandgap high-performance silicon carbide and gallium nitride products and technologies and different application cases
- Answer the questions to win a gift | Choose gate drivers from Infineon, and get a 50-yuan JD card
- Share a table of the electrical and thermal characteristics of the selected packaging materials